Babushka Doll Pillow
that I made for my front porch. Here it is... complete with my pin marks and all :) I just scanned the pattern papers I used on a regular piece of paper. I did it on a light background, so it wouldn't take up much ink when you print it. You should be able to click on the images below and print.
I cut the head, eyes, and hair out of stiff felt from the craft store.
I didn't use this apron, but thought I would include it. I just cut a strip of fabric in the length and width I thought I wanted for the particular doll.
Here are the body top's:
(I didn't have one for the V-shaped top.
I just used the pattern for the top,
and cut the bottom of it down in a V-shape.
You can be creative, and do whatever you want.
Due to the fabric stretching, you may find that you lay your top on your bottom, and the sides overhang. This is fine, and you can just cut off the excess so the sides match up.
(I didn't take pictures when I made these, but I can explain it.)
See my Basic Pillow Tutorial for instructions on making the pillow with an easy envelope back.
For the Babushka:
(Do all this before you attach the front of the pillow to the back!)
2) Using invisible thread, (found at Hobby Lobby) Stitch the face onto the doll top. I like the invisible thread, so I don't have to chance colors three times.
3) Then using the invisible thread, stitch the hair onto the doll face, and then the eyes. Do the eyes last, so you have them placed properly and not too high.
4) You will want to add any embellishments such as lace, and apron (gather to desired length, and add to body bottom), ribbon or buttons at this point. I found it was easier to add lace trim or ribbon, and turn the sides around the body top at this point, rather than waiting until everything is in place.
5) Pin the body bottom on the pillow fabric. Use lots of pins. I don't use fuse-able interfacing, so proper pinning is crucial.
6) Pin the body top on the pillow fabric, matching up the sides, and cutting away any excess you may need to cut.
7) Top Stitch the body bottom in place as close to the edge as you can. Zig-zag around the edges of the body bottom. (You probably needed to unpin the bottom of the body top to do this.)
8) Top stitch the body top in place, and zig-zag around the edges.
9) Finish by attaching the front of the pillow to the back. There you have it... easy peasy!
Thanks for stopping by!
Have a Happy and Creative Day!
I am linking!